Translate form german to english
BoxCracker V1 Kathrein UFS - 910
Based on the original firmware 1.03
Features:
Telnet
- Ftp
- Camd3
Boot time about 25-30sek
Settings Astra 19.2 ° - 13.0 ° - Eutelsat Astra 23.5 °
Install:
At best advance their own settings from the folder / conf secure! ! !
- Usbstick in Fat32 fomatieren
- On the Usbstick create the folder kathrein
Kathrein-folder create a folder ufs910
- The following images in the folder / kathrein/ufs910 / copy:
BC_V1_app.img
BC_V1_conf.img
BC_V1_data.img
BC_V1_ker.img
BC_V1_root.img
BC_V1_eme.img
Kathrein-back of the power switch off
- Usbstick front of the front panel plug
- The Taste "menu" on the front panel, press and hold
While the box on the mains power switch (press "Menu"
Still push "
- If "Update" in the display stands, "Menu" button, starting now
Flash the box itself
Trails:
Camd3, camd3.keys, camd3.config, camd3.server, etc. camd3.users under / data / bin /
Network:
Ip is 192.168.0.25
Whoever wants to change the following possibilities:
1 His Ip network card short segment adjust (eg, 192.168.0.2)
Ftp by connecting to the box (user: root, pass: kathrein)
With a unixfähigen editor in the folder / config file to open start.sh
This line edit-> ifconfig eth0 192.168.0.25 in z.b. ->
Ifconfig eth0 192.168.1.30 depending what ip want to forgive her.
2 His Ip network card short segment adjust (eg, 192.168.0.2)
Via telnet to the box connecting to the directory config change:
Cd / config, the file start.sh with vi Open vi start.sh (enter)
From the line ifconfig eth0 192.168.0.25, which ip adjust
X = Delete
I = insert / paste / schreibmodus
ESC = insert from the modus out
: Wq (enter) file store
3 Box by zero per modem cable to the PC connected, then HyperTerminal
Start Com port settings (depending on where your null modem cable to the Pc's)
Übertragungsgeschwindgkeit: 115200; Flusssteuerung: None
Box start and wait until it has finished booting, then in the HyperTerminal
"Ctrl" - c push into the config directory change (if not already there):
Cd / config, the file start.sh with vi Open vi start.sh (enter)
From the line ifconfig eth0 192.168.0.25, which ip adjust
X = Delete
I = insert / paste / schreibmodus
ESC = insert from the modus out
: Wq (enter) file store
New image For Kathrein910 - BoxCracker
-
viz124
- חבר ותיק
- הודעות: 180
- הצטרף: 26 אוגוסט 2005, 21:09