ערב טוב לכולם
קניתי לא מזמן מכשיר לכיוון לוונים trimax sm-2200
אבל לפני שבוע כיביתי אותו וניסיתי להדליק מחדש הוא נדלק, אבל אין לי תצוגה רק המסך מאיר חלש
האם יש למישהו מכשיר כזה?
או שנתקל בבעיה כזאת?
אשמח אם תוכלו לעזור לי
תודה מראש
מכשיר לכיוון לוונים trimax
-
נ.נ-תקשורת
- חבר פורום

- הודעות: 60
- הצטרף: 03 דצמבר 2006, 21:24
- יצירת קשר:
- esorek
- חבר ותיק

- הודעות: 282
- הצטרף: 03 אוקטובר 2007, 12:07
- יצירת קשר:
-
נ.נ-תקשורת
- חבר פורום

- הודעות: 60
- הצטרף: 03 דצמבר 2006, 21:24
- יצירת קשר:
- esorek
- חבר ותיק

- הודעות: 282
- הצטרף: 03 אוקטובר 2007, 12:07
- יצירת קשר:
נשמע כמו זכרון Flash שנפגם.
בהצצה יותר מעמיקה לאתר של Trimax, מצאתי את הכיתוב הנ"ל :
If your meter was unplugged or lost power while loading and won't boot, here's how to fix it.
* Download and install MeterTool to your PC.
* Connect your meter to your PC and leave the meter TURNED OFF.
* Start MeterTool.
* It will say "Fail to connect com1", click on "OK"
* Click "load software" button
* Choose the correct Operating Software file and click "Open"
* When you see the "Transfer Progress" window, turn on the meter.
* Keep the meter powered and do not move the meter until it finishes loading and has rebooted.
This method forces the meter to accept the program and will flush out any bad or incomplete data that was caused by loss of power during upgrading. Your meter is now back to normal operation.
נלקח מהקישור : http://www.trimaxmeters.com/tips.html#bootfix
בהצלחה !
בהצצה יותר מעמיקה לאתר של Trimax, מצאתי את הכיתוב הנ"ל :
If your meter was unplugged or lost power while loading and won't boot, here's how to fix it.
* Download and install MeterTool to your PC.
* Connect your meter to your PC and leave the meter TURNED OFF.
* Start MeterTool.
* It will say "Fail to connect com1", click on "OK"
* Click "load software" button
* Choose the correct Operating Software file and click "Open"
* When you see the "Transfer Progress" window, turn on the meter.
* Keep the meter powered and do not move the meter until it finishes loading and has rebooted.
This method forces the meter to accept the program and will flush out any bad or incomplete data that was caused by loss of power during upgrading. Your meter is now back to normal operation.
נלקח מהקישור : http://www.trimaxmeters.com/tips.html#bootfix
בהצלחה !
* Mutant 200s * Gemini 4.4-Heb / PLI Jade * 2X1.0m *
* 7W/4.8E/7E/9E/10E/13E/19.2E/25.5E/26E * Storage Nas *

* 7W/4.8E/7E/9E/10E/13E/19.2E/25.5E/26E * Storage Nas *

- dudutr
- תותח על

- הודעות: 1440
- הצטרף: 25 ספטמבר 2006, 18:09
סתכל בלינק בסוף העמוד יש תוכנה לפלאש
http://translate.google.com/translate?u ... ISO-8859-1
http://translate.google.com/translate?u ... ISO-8859-1
DM 800HD GP3
1.20--19.2E-15.8E-13E-9E-4W-7W
1.10--10E-7E-4.8E
1.20--42E
1.20--19.2E-15.8E-13E-9E-4W-7W
1.10--10E-7E-4.8E
1.20--42E

